---

Once you are connected to the unit (If you have not already connected please go to the following article – Connecting to your Nexus unit)

You can now edit the Auto Formula Select settings for the unit. You have access to Timed Mode, Timed Mode + and Binary Mode for your setup. For Timed Mode & Timed Mode + the multiplier effects the program selected based on the length of the signal and the Multiplier set. As seen below:

Multiplier 1 = 1 second signal for program 1
Multiplier 1 = 2 second signal for program 2
Multiplier 2 = 2 second signal for program 1
Multiplier 2 = 4 second signal for program 2
Multiplier 3 = 3 second signal for program 1

For Binary Mode you can modify the Setup Time.

. You can also select if it resets to a set program or a blank program.
If you want to send this to the unit, please refer to – How do I write settings to my Nexus system using the app?

---

Keywords
– Nexus App
– How do I change the Auto Formula Select settings using the Nexus app?
– Auto Formula Select
– Binary mode
– Timed mode
– Auto Formula Select setup

---